DIY Spike Necklace

When a good friend of mine was visiting recently we made it a priority to visit Queen West which, for those who don't know, is Toronto's craft mecca. Tons of stores dedicated to fabric, beads, yarn, buttons and ribbon...mmm... My friend spotted these spikey beads in one of the stores and bought a few in gold. I thought they were so fabulous that I had to follow suit and voila! A DIY was born.

What You Need:

Pliers, wire cutters, small spikes, large spikes, jump rings and a clasp.

We found these spikes at Arton Beads in Toronto. They came in gold and silver, plastic or metal. These ones are plastic so the necklace is light and less of a weapon. Each pack came with roughly 25 beads at only a few bucks a pop. Not bad!

Cut two lengths of chain: 17 inches for the short spikes, 18 inches for the long spikes.

If you think you might want a different length for this necklace, always always always cut more chain than you need. Then you can trim to your heart's desire.

To attach the spiked pendants to the chain, you'll be using your pliers to open and close the jump rings.

Starting with the smaller spikes and the shorter chain, string the pendant onto the jump ring and slip it through one of the links in the middle of your first chain.

I started from the middle and worked my way out to ensure that my cluster remained centred. It's a massive pain to do all that work only to have to redo it!

Space them out about two chain links. The spacing totally depends on the size of the links of your chain so test it out. For my chain, I found 1 space left in between looked nicest.

Try to keep your chain as flat as possible when attaching your spikes.

Keep going until you have 2.5 inches of spikes (17 spikes), or, really, however many you want. You don't actually have to listen to me ;)

Once you get a ton of them on the chain they start to fall into a big cluster.

Move on to adding the longer spikes to the longer chain. Repeat the steps above in attaching the pendants however this time I left 3 spaces in between spikes, having a total of 3.5 inches of spikes (13 spikes).

When you are happy with how the spikes are looking, use two more jump rings to attach the chains (again, careful not to twist them) to your clasp and pow!

Ways to change it:

- Increase the number of spikes per chain.

- Increase/decrease the length of chain, creating more a different shape in the final necklace.

- Add a third strand of spikes, maybe a different colour.

- Paint the spikes using a bright nail polish.

Hope you enjoyed this tutorial!